地面-巷道瞬变电磁法探测采空区积水的应用

为探测呈祥煤矿副斜井在3#煤层下方是否充水,进行了地面-巷道瞬变电磁探测技术的应用。结合一矿81402工作面上方存在不明采空积水区、距离较远、井下正常超前物探难以覆盖的现状,制定了地面-巷道瞬变电磁探测方案。应用过程中发现,相对传统瞬变电磁法,地面-巷道瞬变电磁法受地形影响较小,对浅部数据地质信息反应较好,所观测的数据质量比较高。此外,3条巷道对采空区积水的位置有反映,与调查的采空区积水位置基本一致。实践表明,探测结果为采空区积水的防治提供了参考依据,可以运用到类似工程问题的实践中。     

Effect of vegetative bed on flow structure through a pool-riffle morphology

Natural habitats are created and developed through pool-riffle sequences in rivers, while vegetation cover could play a critical role in the sediment transfer and its quantity and quality. In this study, the effect of vegetation cover on the flow structure in a pool-riffle sequence is investigated in a laboratory flume under bed formation to compare with non-vegetated cover. In this context, instantaneous point velocities were measured by ADV to determine averaged velocity, shear velocity, root mean square velocity, friction factor, Reynolds shear stress and turbulence intensities. Results showed that the vegetation cover increases the thickness of the wall law. Meanwhile, the length of the flow separation zone in the vegetated bedform is more than in the non-vegetated bedform. Variation in roughness coefficients may cause a new boundary layer in which local flow velocities decrease. In both cases (vegetated and non-vegetated bedforms), the momentum is mostly transferred by ejection and sweep phenomena between flow and bedform.     

Influence of hexagonal to orthorhombic phase transformation on diffusion-controlled dendrite evolution in directionally solidified Sn–Ni peritectic alloy

The hexagonal to orthorhombic (HO) transformation from β-Ni₃Sn₂ (hexagonal) phase to α’-Ni₃Sn₂ (orthorhombic) phase was confirmed in directionally solidified Sn–Ni peritectic alloys. It is shown that the remelting/resolidification process which is caused by both the temperature gradient zone melting (TGZM) and Gibbs?Thomson (G?T) effects can take place on secondary dendrites. Besides, the intersection angle between the primary dendrite stem and secondary branch (θ) is found to increase from π/3 to π/2 as the solidification proceeds. This is the morphological feature of the HO transformation, which can change the diffusion distance of the remelting/ resolidification process. Thus, a diffusion-based analytical model is established to describe this process through the specific surface area (S_V) of dendrites. The theoretical prediction demonstrates that the remelting/resolidification process is restricted when the HO transformation occurs during peritectic solidification. In addition, the slope of the prediction curves is changed, indicating the variation of the local remelting/resolidification rates.     

冷轧带钢切边圆盘剪装置的优化与改进

针对冷轧带钢切边后产生的边部梗压印缺陷,结合切边圆盘剪的剪切原理,设计了一种圆盘剪复合衬套,其采用100Cr钢质内圈和MC尼龙外圈复合结构组成,取代原纯钢质衬套,使圆盘剪在剪切带钢过程中由钢性接触转变为弹性接触,从而避免了带钢边部梗压印缺陷的产生,提高了切边质量与剪切里程数,降低了圆盘剪备件成本,提高了生产效率。     

Validation of Models Predicting Nucleation Rates from Induction Times and Metastable Zone Widths

Three approaches for estimation of nucleation rates from induction time and metastable zone width (MSZW) were validated based on directly measured nucleation rates for paracetamol in ethanol. To quantitatively predict nucleation kinetics using Kubota's methods it is necessary to know the minimum detectable number concentration of nuclei. This was found by determination of light transmission of a series of diluted suspensions of newly nucleated crystals where the size had already been assessed by optical reflection measurement (ORM). The measured nucleation rates strongly depended on both temperature and supersaturation. The Nyvlt method predicted nucleation rates in this system reasonably well; however, it gave slightly low estimates for all temperatures. The methods of Kubota provided nucleation rates that were low by an order of magnitude.     

不锈钢电弧铆焊焊点组织及力学性能

采用电弧铆焊的方法对3 mm+5 mm厚的0Cr18Ni9不锈钢钢板采用搭接形式实现连接. 通过优化焊接电流及其作用时间的参数匹配，以期得到最佳的焊点显微组织和力学性能. 采用X射线检测焊点缺陷的存在，使用金相显微镜研究焊点熔深和熔核尺寸的变化，使用电子万能试验机测试焊点的抗剪力. 结果表明，电弧铆焊焊点呈蘑菇状，与基体圆滑过渡，成形良好，无气孔、裂纹等宏观缺陷. 随着第一段和第二段焊接电流的增大，焊点的熔深和熔核尺寸，及焊点抗剪力随之增大. 优化的工艺参数下，熔深尺寸可达4.07 mm，熔核尺寸可达7.73 mm，抗剪力可达23.654 kN，满足生产需求.     

渤海海域辽西构造带S型走滑转换带特征及控藏作用定量表征

S型走滑转换带是走滑环境下广泛发育的一类构造。以往的研究认识多集中在对走滑转换带类型划分的探讨上，缺乏对其控藏作用的精细研究。本次研究利用渤海海域辽东湾地区连片三维地震资料，结合油气田实例，运用统计学方法分析了辽西构造带S型走滑转换带的控藏作用。辽西带新生代构造变形总体表现为NE向伸展构造系统和NNE向右旋走滑构造系统的叠加构造变形，S型走滑转换带可分为增压段和释压段两大类。按照走滑转换带演化阶段的不同，将增压段进一步细分为压扭低凸起段、平缓增压段和强烈增压段等3个亚类。将释压段同样细分为纺锤形浅凹、平缓释压段和菱形释压段等3个亚类。将走滑断裂末端发育的转换带归纳为增压型或释压型马尾扇。应用S型走滑转换带“油气富集指数”的分析方法，论证了S型走滑转换带弯曲度与走滑调节断层活动性具有正相关性，并成功应用于辽西凹陷南次洼旅大5-2北油田成藏分析工作中，为勘探决策提供了定量化依据。     

深部软岩巷道围岩变形特征及数值模拟分析

针对深部煤矿开采条件下软岩巷道围岩出现持续流变时间长、变形大、地压高、巷道难以维护等特点，首先分析了深部软岩巷道变形特征，采用FLAC^3D数值模拟软件，分析了不同埋深条件下巷道围岩垂直应力分布、水平应力分布以及巷道围岩塑性区扩展规律。研究得出，深部软岩巷道的围岩岩块呈松散破碎形态，相互翻转和滑移，岩体的模量和强度低；随着巷道埋深的逐渐增加，巷道围岩应力集中系数逐渐减小，巷道垂直、水平应力峰值逐渐变大，塑性破坏范围扩展速率逐渐增加。研究为深部软岩巷道支护提供理论基础。     

冷喷涂固态颗粒沉积中颗粒间结合形成机制研究进展

就目前主流的冷喷涂颗粒结合形成机理进行了系统总结和评述,为冷喷涂沉积体性能的调控和后续研究提供借鉴。分别就经典的颗粒界面绝热剪切失稳结合机理,颗粒界面应力波释放诱导材料射流形成结合机理,以及高速碰撞诱导颗粒表面氧化膜破碎、新鲜金属接触结合机理的基本概念、原理、特点进行了概括总结。通过大量系统文献的调研,指出现有理论目前存在的相悖和不足之处,并简要分析了现有颗粒间结合形成理论对冷喷涂沉积体质量调控方面的指导意义。最后基于现有研究的不足,对冷喷涂颗粒界面结合机制方面的研究进行了展望。